Benefits

• Designed, developed and calibrated specifically for the flooring industry
• Instant Readings in non-destructive and wood probe modes
• Measures Up To 7% Moisture Content in Concrete
• Measures from 7% to 40% Moisture Content in Wood using the plug in wood probe
• Relative humidity probe provides clear digital display with simultaneous reading for Humidity in both (%RH) and grains/lb. or grams/kg. in addition to Temperature and Dew Point.
• Can be used for Non-Destructive Hood Method (ASTM F2420) or sub-surface In-Situ method (ASTM F2170).
• Complies with BS Standard BS5325:2001 and BS 8203:2001 for above surface readings of RH, Temperature and Dew Point readings.
• Detachable 0.4" (10mm) diameter stainless steel RH Probe.
• Intelligent RH Probe can be recalibrated. (Traceable to NIST and international standards.)
• "Hold" freezes reading on analog meter
• Battery Operated (Supplied)

Benefits

• A Concrete Moisture Encounter CME 4 for non-destructive and instant moisture testing of concrete flooring.
• An electronic Digital Hygrometer for fast and accurate measurement of relative humidity temperature and dew point.
• A Professional Moisture Meter for instant and accurate moisture measurement of wood flooring and sub-flooring displayed on a clear digital read-out.
• A slide action electrode for moisture probing when necesary of up to 1.5" (35mm).
• Infra-red Surface Thermometer for checking concrete slab surface temperatures.
• These instruments plus service tools and spare pins are neatly contained in a rugged and attractive die cut foam lined carrying case.

Benefits:

• The MRH is a digital display multi featured version of the popular Tramex Moisture Encounter Plus meter. It non-destructively measures percentage moisture content in wood but incorporates a switchable specific gravity adjustment covering wood SG’s of 0.3 to 0.8. Like the MEP it provides relative/comparative readings deep into most building materials such as Dry-wall, Roofing, Brick, Ceramic tile etc.
• Plug in WPIE with Hammer Probe to give accurate moisture readings in wood from 7 to 40%.
• Plug in reusable Relative Humidity Probe for Relative Humidity, Temperature, Dew-Point and Mixing Ratio readings. This RH probe is for measuring ambient conditions or for performing In Situ (ASTM F2170) or RH Hood (ASTM F2420, BS 5325:2001 & BS 8203:2001) methods.
• Instant Readings in non-destructive and wood probe modes
• 5 scales in non-destructive mode including percentage moisture content in wood
• Measures from 7% to 40% Moisture Content in Wood using the plug in WPIE and Hammer Probe with insulated pins.
• Reusable Relative humidity probe provides clear digital display with simultaneous reading for Humidity in both (%RH) and grains/lb. or grams/kg. in addition to Temperature and Dew Point for measuring ambient conditions.
• Reusable Relative Humidity probe can also be used for sub-surface In-Situ method (ASTM F2170) or Non-Destructive Hood Method (ASTM F2420)
• Complies with BS Standard BS5325:2001 and BS 8203:2001 for above surface readings of RH, Temperature and Dew Point readings.
• Detachable 0.4" (10mm) diameter stainless steel RH Probe.
• Intelligent RH Probe can be recalibrated. (Traceable to NIST and international standards.)
• "Hold" feature freezes reading on display.
• Battery Operated (Supplied)
• Die cut foam case allows for addition of Optional extras such as Hand Probe with insulated deep-wall pins, infra-red surface thermometer and a second Tramex moisture meter.

Benefits:

The IAQ / Mold Remediation Kit contains
• A non-destructive Moisture Encounter Plus
• A Professional pin type resistance meter
• A hand held electrode with insulated 7" pins,
• A Digital Hygrometer for temperature, RH% and dew point readings
• Infra-Red Surface Thermometer.
• All of the above in a die cut carrying case.

Benefits:

• Wet Wall Detector, the Non-Destructive Moisture scanner that will read over 3 inches of Exterior EPS Insulation System.
• Professional Wood Meter, a resistance type Wood Moisture Meter with special EIFS Probe with long insulated pins to verify moisture content and probe for structural integrity of the sheathing and wood framing.
• Hand held electrode with 7" insulated pins.
• Heavy Duty 2 pin punch for penetrating EIFS lamina, so pin meter readings can be taken.
• Optional Digital Hygrometer, gives Relative Humidity, Temperature and Dew Point readings.
• Optional Infra-Red Surface Thermometer for instant read surface temperatures.

THIS KIT CONTAINS:

A non-destructive Skipper Plus.
• Professional pin type resistance meter. Use with hand held electrode for deep probing into hull a various other materials.
• Hand held electrode with 7" insulated pins.
• Digital Hygrometer for Temperature, Relative Humidity and Dew point temperature readings. Check relative humidity in cargo areas, engine room and forward cabins. Knowing dew point temperature and hull surface temperature could be helpful before application of new hull materials.
• Optional Infra-red Surface Thermometer for checking surface temperatures before & during application of hull materials, overheating of bearings, power generators etc.
• All of the above in a foam lined carrying case.

Benefits:

• RWS Roof & Wall Scanner the Non-Destructive Moisture scanner for scanning nonconductive roof systems and for EIFS.
• Professional Wood Meter, a resistance type Wood Moisture Meter with special EIFS Probe with long insulated pins to verify moisture content and probe for structural integrity of the sheathing and wood framing.
• Hand held electrode with 7" insulated pins.
• Heavy Duty 2 pin punch for penetrating EIFS lamina, so pin meter readings can be taken.
• Optional Digital Hygrometer, gives Relative Humidity, Temperature and Dew Point readings.
• Optional Infra-Red Surface Thermometer for instant read surface temperatures.

• A Professional Moisture Meter for instant and accurate moisture measurement of structural wood, wood flooring and sub-flooring displayed on a clear digital read-out.
• A slide action hammer electrodefor moisture probing when necessary of up to 1.5" (35mm).
• Hand Held Electrode for probing deep into wall cavities and hard to reach areas etc.
• These instruments plus spare pins are neatly contained in a rugged and attractive die cut foam lined carrying case.
• Kit shown is Professional Kit 3. See pricing below for different kit configurations.

• A Compact Moisture Meter for instant and accurate moisture measurement of structural wood, wood flooring and sub-flooring displayed on a clear analog dial.
• A slide action hammer electrode for moisture probing when necessary of up to 1.5" (35mm).
• Hand Held Electrode for probing deep into wall cavities and hard to reach areas etc.
• These instruments plus spare pins are neatly contained in a rugged and attractive die cut foam lined carrying case.
• Kit shown is Compact Kit 3. See pricing below for different kit configurations.